Blogaholic
Logga in
·
Styr upp en egen blogg
·
Köp Bitcoins billigt

Installing and Removing a QSFP+ Transceiver

Overview

The 40-Gigabit QSFP + transceiver module is a hot-swappable, parallel fiber optical module with four independent optical transmit and receive channels. These channels can terminate in another 40-Gigabit QSFP + transceiver, or the channels can be broken out to four separate 10-Gigabit SFP + transceivers. The QSFP + transceiver module connects the electrical circuitry of the system with either a copper or an optical external network. The transceiver is used Primarily in short reach applications in switches, routers, and data center equipment where It provides higher density than SFP + modules.

JG325B

Installing a QSFP + Transceiver

The QSFP + transceiver module can have either a bail-clasp latch or a pull-tab latch. Installation procedures for bothering types of latches are provided.

To install an QSFP + transceiver module, follow These steps:
Step 1 Attach an ESD wrist strap to yourself and a properly grounded point on the chassis or the rack.
Step 2 Remove the QSFP + transceiver module from its protective packaging.
Step 3 Check the label on The QSFP + transceiver module body to Verify That You Have the correct model for your network.
Step 4 For optical QSFP + transceivers, remove the optical bore dust plug and set it aside.
Step 5 For transceivers equipped with a bail-clasp latch:
a. Keep the bail-clasp aligned in a vertical position.
B. Align the QSFP + transceiver in front of the module's transceiver socket opening and Carefully slide the QSFP + transceiver into the socket Until The transceiver makes contact with the socket electrical connector. (See Figure1)

Installing QSFP +

Step 6 QSFP + transceivers equipped with a pull-tab:
a. Hold the transceiver So THAT the identifier label is on the top.
B. Align the QSFP + transceiver in front of the module's transceiver socket opening and Carefully slide the QSFP + transceiver into the socket Until The transceiver makes contact with the socket electrical connector.
Step 7 Press firmly on the front of the QSFP + transceiver with your thumb to fully seat the transceiver into the module's transceiver socket. (See Figure2)

Installing QSFP +

Step 8 For optical QSFP + modules, reinstall the dust plug into the QSFP + transceivers, optical bore Until you are ready to attach the network interface cable. Do not remove the dust plug Until you are ready to attach the network interface cable.

Removing a QSFP + Transceiver

To remove a QSFP + transceiver, follow These steps:
Step 1 For optical QSFP + transceivers, disconnect the network interface cable from the QSFP + transceiver connector.
Step 2 QSFP + transceivers equipped with a bail-clasp latch (See Figure3, top view):
a. Pivot the bail-clasp down to the horizontal position.
B. Immediately install the dust plug into the optical transceivers bore.
C. Grasp the sides of the QSFP + transceiver and slide it out of the module socket.

Removing QSFP +

Step 3 QSFP + transceivers equipped with a pull-tab latch (See Figure3, bottom view):
a. Immediately install the dust plug into the transceiver's optical bore.
B. Grasp the tab and gently pull to release the transceiver from the socket.
C. Slide the transceiver out of the socket.
Step 4 Place the QSFP + transceiver into an antistatic bag.

Conclusion

As 40 GbE are Widely deployed, 40G transceiver optics are ubiquitous. A good practice and correct installation are very important for 40G network systems, not only to protect the 40G transceiver optics and device from damage, but overpriced to ENSURE a stable performance of the system. Fiber store offers a wide range of 40G transceiver modules, Such as QSFP-40G-LR4 S, QSFP-40G-SR4-S, QSFP-40G-ER4, etc. All These transceivers are tested in the original fire switches to guarantee the high compatibility with major brands. For more information or quotation, please contact us via sales@fs.com. 

Publicerat klockan 11:06, den 26 januari 2016
Postat i kategorin Okategoriserat och taggat som qsfp-40g-lr4-s, jg325b
Dela med dig på Facebook, MySpace, Delicious

Det finns inga kommentarer

Skriv en kommentar

Namn
Email
Bloggadress
Vad blir sex plus åtta? (Svara i siffror.)
Kommentar
Laddar captcha...
Om den inte laddar, var god inaktivera av Adblock!
För att publicera en kommentar måste du verifiera vår Captcha. Den använder under några sekunder en del av din processor för att bekräfta att du inte är en bot.